DK-3型 定子整形機
DK-3 Stator Coil Forming Machine
本機適用于交流感應電機綁扎好后的兩端線圈的精整形。采用一體式液壓站作為動力，速度均勻，整形力量穩定，三菱PLC程控，觸摸屏顯示，放入工件后自動下行到位整形，接近開關控制行程，雙按鍵啟動，分單步、連續工作方式，操作簡單。
This machine is suitable for AC induction motor lashing the two ends of the coil after finishing. One-piece hydraulic station as power, speed uniformity, shaping power and stability, Mitsubishi PLC program-controlled, touch screen display, into the workpiece automatically down in place plastic, close to control the trip, double-key start, single step, continuous work, easy to use.
技術參數/Technicai Parameters
| 電源電壓Supply voltage | AC380V±10% 50Hz |
|
總功率Total power |
3 kw |
|
液壓壓力Hydraulic Pressure |
0~7MPa |
| 最大定子內徑Max.Stator ID | ≤Φ160 mm |
| 最小定子內徑Stator ID |
≥Φ40 mm |
| 定子疊厚Core thickness |
20~280mm |
|
|
|
浙公網安備 33102202000120號
